To make a dragonfly you will need 63 triangular modules: 8 red, 16 yellow, 7 green and 32 blue.
The body consists of 19 modules: 8 red and 11 yellow. First you need to connect 2 modules, putting the pockets on each other with the long side. You will need 2 of these blanks.
Using three yellow modules, you should connect the red blanks. The modules should also be put on with the long side.
You need to insert one more yellow module into the free yellow side pockets. In the future, dragonfly wings will be attached here.
The fourth row will consist of two red modules. They need to be worn with the long side.
The fifth row consists of three yellow modules. The difference here is that in the yellow pockets you need to hide not only the red modules of the previous row, but also the protruding yellow corners of the third row. Again, one yellow module must be inserted into the side pockets of the yellow modules. The second pair of wings will be attached here.
The sixth row includes 2 red modules, and they need to evenly cover all the corners of the previous row.
To finish making the dragonfly's body, you need to put on 1 yellow module in the middle.
To make one dragonfly wing you will need 8 blue modules. Each module must be inserted at one corner into the corresponding pocket.
The last module, which will be attached to the body, needs to be inserted into two pockets.
According to this principle, you need to assemble two right wings and two left ones.
The tail will consist of 5 green and 5 yellow modules. Alternating them, you need to insert them with two corners into 2 pockets. When finished, bend the tail slightly.
The mustache is very easy to make from two green modules. They need to be screwed onto a pencil or pen so that they become round.
When all the components are ready, you should begin assembling the dragonfly.
The corresponding wings must be placed on the holders. Then, attach the tail, hiding all 4 free corners in it. The mustaches should be inserted into the modules of the first row.
A bright, beautiful dragonfly made from triangular modules is ready!
The colors of the modules can be changed to suit your taste. Dragonflies made in different color combinations will look very beautiful.
