To work we will need:
- skewers.
- beads.
- glue gun with silicone rods.
- corrugated paper blue, blue, white.
- floral mesh.
- foil.
- scissors.
- threads.
- chain.
Let's get to work. We start by making the base of the fan. To do this, take skewers. You need 14 of them.
To decorate the base we will use blue color. Take blue corrugated paper and cut strips across the grain. The size is 1x15 cm. We cut them as many as skewers. Stretch the strip to the limit. We will use it to wrap the skewer.
Use a glue gun to glue the strip to the skewer. At the same time, we tighten it as tightly as possible. Twist the strip in a spiral around the skewer.
Let's prepare all the necessary skewers. We will need 14 skewers.
Let's start assembling the base. Take the skewers and glue them to each other at an angle of 45 degrees. We glue everything tightly.
Now you need to glue the bottom part of the fan.To do this, take a strip of blue paper measuring 2x5 cm. And stretch it completely. And glue the bottom. Thus, to close the connection between the skewers.
Then we move on to the beads. We take blue beads, the number corresponds to skewers. Glue each bead onto the sharp edge of a skewer.
This is what we get. We glued all the beads.
Now let's move on to the floral mesh. Which is also blue. Take a piece measuring 30x30 cm and cover the skewers tightly with it. To make it easier to work, we thread skewers with beads into the holes of the mesh. Glue it to the bottom base, and glue each skewer well to the mesh. When the glue has dried and the mesh is securely attached to the base of the fan, we begin the correction. Trim off unnecessary edges of the mesh.
Let's move on to making flowers. They will come in three sizes. And each flower will require two sizes of petals. Large blue ones - 3x5 cm 4 pieces, and 5x5 cm three pieces. Medium blue - 3x4 cm four and 4x4 cm 3 pieces. Small white flowers - 2x3 four, 3x3 three pieces. Let's go back to the big blue flowers. We cut strips of the required sizes. We cut off the corners on the strips into a petal shape.
Using a skewer or knitting needle, curl the edges of the petals. And with our fingers we stretch the paper a little, making a depression in the middle.
Let's start making a bud. To do this, take foil measuring 10x10 cm and roll it into a ball. Now take one of the four petals and roll a ball of foil into its middle. We tie the resulting bud with threads.
Then we begin to glue the petals to the bud. Starting with the little ones.
Thus, we glue the remaining petals of small and large sizes.
We will need three of these large roses. There are also 3 medium blue ones. And four small ones.
Glue the large roses together.
Then we glue these roses onto the base. Let the glue dry well.
Now we take small white flowers and glue them on both sides below to the base under the large flowers.
Then we take the medium blue roses and glue them in a checkerboard pattern relative to the large roses.
It's time for the remaining two small white roses, glue them between the blue ones.
The final touch remains. You need to secure the chain. To do this, take blue paper, cut off two strips of 1x2 cm in size from it. Straighten it and roll it into a tube. We glue it so that it does not unwind. Then we press it down so that it becomes flat. Glue a chain to these strips. Then glue these strips to the base. In a suitable place, attach the strips with a chain to the skewers on the back of the fan. All is ready.
Good luck to all.
