DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Bead tree of love for newlyweds
Sometimes, having received an invitation to a wedding, I want to give the newlyweds a special present, which will not only please them, but will become the talisman of their family life. A love tree made of beads with rosebuds, symbolizing blooming love, will be a pleasant surprise for the bride and groom, especially if it is made with your own hands.

What is necessary?

Making a love tree with blooming roses is not as difficult as it seems at first glance. A minimum of skills in the art of beadwork and the necessary equipment are enough, namely:
- beads (light and dark green, red);
- wire of different diameters (depends on the size of the beads and the thickness of the tree trunk);
- thin threads of green color;
- PVA glue;
- cotton wool;
- disk;
- a suitable wedding figurine;
- pliers.

Weaving roses

The French beadwork technique used to create these beautiful roses is pretty simple. The central and extreme petals of the flower are woven in different ways, but the essence of their implementation is the same - the circular braiding of the bead row. Let's consider each stage in more detail.

Bead tree of love for newlyweds


Weaving three blossoming rose flowers

1. Weaving of the central petals.
To weave the central rose petals, two pieces of wire are required, the diameter of which should be less than the hole of red beads. To save wire, a large amount of red beads is strung directly on a skein.

Weaving three blossoming rose flowers


A piece of wire 5-10 cm long is attached to the end of the wire with a bead row, as shown in the photo - this is the axis around which the bead row will be braided.

Weaving three blossoming rose flowers


Beads of a certain number are strung on the axis - the more there are, the larger the petal will be. At an angle of 90 degrees, a wire with a bead row in one revolution is fixed on the opposite side of the connection to the axis. The wire must be brought over the axis - this moment is important, since the wire should be less noticeable on the front side of the product.

Weaving three blossoming rose flowers


Next, the wire with the bead row is fixed in one revolution at the base of the connection with the axial wire. The twist angle is 90 degrees.

Weaving three blossoming rose flowers


Thus, four rows of braiding axis are made. Due to the fact that the connection angle is 90 degrees, the shape of the petal will turn round.

Weaving three blossoming rose flowers

Weaving three blossoming rose flowers

Weaving three blossoming rose flowers

Weaving three blossoming rose flowers

Weaving three blossoming rose flowers

Weaving three blossoming rose flowers

Weaving three blossoming rose flowers


The axis wire is cut and bent to the wrong side.

Weaving three blossoming rose flowers


You need to make nine petals with six beads on the axis, and twenty one petal with eight beads on the axis.

2. Weaving the extreme petals

The extreme rose petals are woven in the same technique as the central ones, with the only difference being that, to obtain wider petals, two axes are used.

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals


The wire also winds over the axes when turning at an angle of 90 degrees along the edges of the axes.

Weaving of extreme petals

Weaving of extreme petals


Axes are braided in seven rows. With each row between the axes, the number of beads increases in the following sequence: 1-2-4-6-8-10-12.

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals

Weaving of extreme petals


You need to make eighteen petals with a double axis.

3. Weaving sepals

Rose sepals core is woven using French technique.
It is necessary to braid a core of eight light green beads with one row of dark green beads.
When fixing, the wire is brought over the axis. The twist angle should be sharp.

Sepals weaving

Sepals weaving

Sepals weaving


The second row consists of half the amount of the first row. A wire is led between the beads and a double row of dark beads is pulled to the middle of the extreme row.

Sepals weaving

Sepals weaving


At the base of the sepal, it is necessary to draw the wire between the extreme rows and to attach a similar double row on the other side.

Sepals weaving

Sepals weaving

Sepals weaving


For rosebuds, five sepals per flower are required.

4. Assembling a rose flower

As described above, for one flower it is necessary:
- three small petals with one axis;
- seven larger petals with one axis;
- six petals with a double axis;
- five sepals.
The petals are connected together by green threads. ,

Rose flower assembly


First, three small petals are connected. They need to be slightly bent along the axis, then put one into the other and tightly wind their bases with threads.

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly


Next, attach the remaining petals, forming a bud. Each petal must be bent, giving it a natural shape. Curved petals lie much easier and more accurately on the bud.

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly


Extreme petals with two axes join. All rose petals overlap in a circle.

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly

Rose flower assembly


The last is attached sepals, which also need to give a curved shape relative to the bud.

Rose flower assembly

Rose flower assembly

Rose flower assembly


Weaving rose buds

1. Five-petal rose buds

For these buds, it is necessary to weave five petals with eight leaves on the axis and five sepals.

Five Petal Rose Buds


Place one petal in the middle, folding it in half along the axis. Further, with an overlap, four petals around the central are attached with threads.

Five Petal Rose Buds

Five Petal Rose Buds

Five Petal Rose Buds

Five Petal Rose Buds


The last are attached sepals.

Five Petal Rose Buds

Five Petal Rose Buds


You need to make three such buds.

Five Petal Rose Buds


2. Four-petal rose buds

Rose buds with four petals are made similarly to rose buds with five petals, with the only difference being that there are three extreme ones around the central petal.

Four Petal Rose Buds

Four Petal Rose Buds

Four Petal Rose Buds

Four Petal Rose Buds

Four Petal Rose Buds


It is necessary to make two similar buds.

Four Petal Rose Buds


3. Closed rosebuds

Closed rosebuds are made from one petal with eight beads on the axis and three sepals.
The petal is twisted in a spiral and folded in half. In this case, it is desirable to use a soft wire.

Closed Rosebuds

Closed Rosebuds

Closed Rosebuds

Closed Rosebuds

Closed Rosebuds

Closed Rosebuds


The twisted petal is surrounded by three sepals and fixed with thread.

Closed Rosebuds

Closed Rosebuds


Weaving rose sheets

The leaves of the rose are also woven using the French weaving technique. A certain number of beads - 5 or 8 - is gathered on the axis, depending on the desired leaf size. The more beads on the axis of the sheet, the larger it will be.

Weaving rose sheets


The twist angle is sharp. Alternating beads in different shades of green will make the leaves more effective.

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets

Weaving rose sheets


It is necessary to make such a number of leaves that it is a multiple of three. The more leaves, the more magnificent and greener the tree will turn out.

Weaving rose sheets


Next, the leaves are collected in twigs of three leaves. This is done using green threads.

Weaving rose sheets


Assembling a tree of love from beads

1. The manufacture of the frame

The frame for the tree of love from beads is made of wire of a larger diameter so that it does not bend under the weight of flowers and leaves, maintaining the shape of a heart. Two pieces of wire are twisted into the necessary shape, connected using threads. The remaining length of the wire at the base is given the shape of a ring (perpendicular to the trunk), so that the tree will stand upright. Thus, the length of the wire should exceed the length of the branches that make up the heart.

Frame manufacturing


2. Branch design

When the frame is ready, flowers and leaves are attached to it. Rose flowers are pretty heavy. To reliably fix the flower on the base, it is necessary to grow the stem by attaching a stronger wire with threads, and then fasten it to the base with a thin wire. Distribute flowers and leaves should be evenly, creating a single composition.

Decoration branches

Decoration branches

Decoration branches


3. Decoration of a tree trunk and a meadow

To decorate the trunk of the tree of love and the clearing on which it stands, you will need:
- cotton wool;
- PVA glue;
- disk;
- beads;
- paints;
- brushes and water;
- transparent nail polish or acrylic varnish.

PVA glue is diluted with water in a ratio of 1: 1.

Decoration of a tree trunk and a meadow


The tree is mounted on a disk and stuck with cotton wool soaked in a solution of PVA and water.
First, the branches of the tree are formed. Dampened cotton wool is pulled and wrapped with bare wire. Leaves and flowers must be folded before work.

Decoration of a tree trunk and a meadow


The base is also covered with dampened cotton wool, which glues the tree to the disk. It is important to fill all the voids between the wire and the disk.

Decoration of a tree trunk and a meadow

Decoration of a tree trunk and a meadow

Decoration of a tree trunk and a meadow


Next, the tree is cleaned in a ventilated room until completely dry. The dried cotton wool is painted in different shades of green and brown, applying the lighter paint with the first layer.
Glade painted in the tone of a tree.
After the paint dries, a transparent varnish is applied to the trunk and meadow. Before the varnish dries, the meadow is decorated with beads to match. It is also possible to establish a statuette suitable for the occasion.

Decoration of a tree trunk and a meadow

Decoration of a tree trunk and a meadow

Decoration of a tree trunk and a meadow

Decoration of a tree trunk and a meadow

Bead tree of love for newlyweds

Bead tree of love for newlyweds

Bead tree of love for newlyweds

Bead tree of love for newlyweds


Conclusion

Such a tree of beads does not require special care. It is enough to shake off a dust with a soft brush several times a month or blow it off with a vacuum cleaner at a low speed. Beadwork looks best in good light in an easily accessible place.
come back
Comments (7)
  1. Jana
    #1 Jana Guests October 25, 2015 12:33
    4
    Strange ... But I naively believed that this was my work of authorship ...
    1. Antonina
      #2 Antonina Guests February 10, 2018 2:23 p.m.
      0
      Yana, this is a bad parody of your work
  2. Sveta
    #3 Sveta Guests April 9, 2016 22:09
    2
    God, how gorgeous. Well, how much bead and time does it take? Just heroism, the author of this charms well done!
  3. Anastasia
    #4 Anastasia Guests August 16, 2016 00:04
    3
    Tell me, please, the consumption of beads at least approximately?
  4. Natalya
    #5 Natalya Guests 9 january 2018 20:50
    1
    Thank you very much for the detailed master class! I made 9 of these on gifts friends for the new year))) Only not with cotton, but with a plaster, I deceived and painted with acrylic paint, and then with colorless varnish, it turned out super!
  5. Diana
    #6 Diana Guests June 26, 2018 07:48
    0
    Hello. How much about a gram of beads each color took?
  6. Ogneva E.A.
    #7 Ogneva E.A. Guests August 30, 2018 04:29
    0
    Thank!!! Everything is clear, detailed and intelligible. I'm doing now present for the wedding in your mk. The only thing you have to run for beads. I don’t know the consumption, I don’t want to take too much, so I take it in portions

Read also

Error codes for washing machines