To work on the product we take the materials:
- satin ribbon 2.5 cm wide in blue and green.
- a narrow white tape 1 cm wide.
- PVA glue.
- a candle.
- scissors.
- ordinary black threads.
- floristic wire.
- glitter powder or beads.
- glue gun.
- large hair clip.
-foil.
Let's start making petals for cornflowers, we have two flowers and one bud. For one, we cut 11 strips 5 cm long, and for the bud 3 more such segments.
Slices of each strip are processed first above the candle.
We have the workpiece in length, raise the lower corners up to the middle, overlapping each other a little with an offset. The result is a triangle.
Then we bend one corner of this triangle in front again towards the middle.
And the second corner is bent to the middle, but behind. We get an even smaller triangle.
Now this workpiece needs to be fixed. We bring the lower bend angle to the candle, warm it and press it with our fingers. And the upper corners will be free. We get one petal from one strip.
For cornflowers with a bud, we make 25 such blanks. And for daisies we take a thin white ribbon, cut 24 strips of 6 cm long.
Over the candle, we sequentially fasten the bent strips in half. Cut two circles with a diameter of 3 cm. Petals for daisies are ready.
Now for the leaves we take a green ribbon. We cut 10 strips of 6 cm each.
We cut each strip diagonally from the bottom corner to the top, we get two leaves.
We also melt these blanks of leaves above the candle so as not to shag. And on the wide side of the workpiece, we make a fold, turn the corners to the middle of the sheet and fix it over the fire. In this way we process all the leaves.
For the cornflower bud, take 3 blue petals, two green segments of 6 cm, rounded at the bottom and 4 leaves of the corner.
We begin the assembly. Take a piece of wire 8 cm long, glue it with a strip of corrugated paper with PVA glue. You can use the tape. We make a ball of foil 10 x 10 cm in size and fix it to the wire. And with this pistol we glue two green strips with a rounding at the bottom. We twist the free upper edge as in a candy and fix it.
In the middle of the green bud we attach 3 blue petals.
Now let's start assembling daisies. We take a circle with a diameter of 3 cm and fasten it with a glue gun on white curls of thin tape, making the first row of 6 blanks. And the remaining 6 pieces are glued in the second round, arranged in a checkerboard pattern.
It remains to decorate the middle with beads or sparkles, we fix them on PVA glue.
Proceed to the cornflowers. We also collect them in a circle with a diameter of 3 cm. Glue the petals in two rows, leaving the middle free.
We will make stamens from simple threads of black color. We wind a lot of turns on our two fingers, remove. We connect the resulting circle in the middle and fold in half. Then we fix the thread at the bottom, we get a brush. We trim the edges of it evenly.
Glue this brush in the middle of the cornflower.
Then, with PVA glue, lubricate the edges of the brush and lower it into sparkles, shake off excess.
Now all the blanks are assembled.
It remains to add only leaves to all colors. To the cornflowers, add one blank of 4 leaves glued to each other in the lower corner. And glue to the flower in one direction.
Cornflowers are ready.
For daisies, glue the leaves in two pieces together from the bottom. There will be 3 blanks, fastened in a circle.
Now all the flowers with leaves are ready.
We take a large hair clip and begin to attach flowers to it in turn. Immediately glue the fastener from the tapes to each flower with a gun, we place them through the inside of the clip to the flowers. First we fasten the bud on a narrow edge, then we place one cornflower next to it. Next will be a daisy.
To the first camomile we have the second one, slightly inclined, and on the wide edge we glue the second cornflower. And the decoration is ready.
Good luck to all.
