To make a needle-hat, you will need a small piece of cardboard, any fabric and decor of your choice: lace, ribbon or flower.
The process of creating our hat:
1. On a cardboard draw a circle. To do this, it is not necessary to have a compass, you can simply draw a pencil along the contour of the plate. Cut a circle and another small strip of cardboard for the walls of the needle bed.
2. Fasten the strip of cardboard with thread and stuff with cotton.
3. Cut off a piece of fabric twice the diameter of the circle and stitch it along the edge of the fabric with a seam, as they say “on a zhivulka”. We wrap a cardboard circle with this fabric. We tighten the thread so that the edges converge approximately in the center of the cardboard circle.
4. Cotton wool with a cardboard wall is also sheathed with a cloth. In this case, try to evenly distribute the folds of fabric on the walls.
5. Now it remains to sew the top of the hat (with cotton) to the fields of the hat, that is, to the cardboard circle covered with fabric. By stitching them together, you hide the ugly stretched edges of the fabric. The hat is almost ready.
6. For the decor, I take the usual satin ribbon. First you need to make a bow. The bow will turn out even if the tape is wound on an object, and then tied in the middle. You can use a comb for this, as in my photo.
7. Then, attaching the bow, sew the ribbon at several points. To prevent the ribbon from opening, the ends must be cut with a triangle or diagonally.
Look: here the hat lies on the table, but it hangs on the wall. Now the needles will not be lost and your room will be decorated with a flirty hat. I spent only half an hour on its manufacture.
