DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Elastic band for hair" Terry Chrysanthemum "
To create an elastic band for hair "Terry Chrysanthemum" you will need:

Scrunchy


- ready-made elastic for hair of any thickness.
- a bright pink satin ribbon whose width is 2.5 cm.
- scissors.
- a gun for working with hot glue.
- tweezers with a curved edge.
- contour for fabric with sparkles.
- green satin ribbon.
- a candle or a lighter.

The sequence of creating the flower. We cut the bright pink ribbon into small blanks. Their sides are 2.5 x 2.5 cm, they will need 50 pieces.

chopped


Fold the two sides of one of the corners together, forming a triangle, leaving the wrong side of the tape outside. Clamp with tweezers and singe the edges with fire, gluing them together.

Folding two sides


Then we straighten the resulting part, and place the created seam exactly in the middle of the workpiece.

straighten the resulting part


We get a little fist. We clamp the lower corner with the edges of the tweezers, stepping back a little from the edge. Then we cut the fabric to the place of attachment of the tweezers and singe the sections.

cut the fabric


We get such a petal. From the rest of the blanks we create the same, following the same sequence.

we create the rest of the blanks


Next, we cut a circle with a diameter of 4 cm from a wide ribbon. We select the color of the ribbon in accordance with the shade of the petals. The edges of the resulting part are scorched to prevent shedding. Now glue the prepared petals around the entire circumference.

select according


Gradually distributing them in a circle, forming the first row.

distributing them in a circle


Then we attach the petals of the second row, placing them in the gaps between the details of the previous row.

prepare the middle of the flower


Now prepare the middle of the flower. To do this, take one petal and twist into a tube, using hot glue for bonding.

prepare the middle of the flower


Then we glue other petals around this tube, uniformly attaching them around the circumference. We fix in this way only 15 parts.

stick the tubes


We get such a middle, which we glue in the center of the prepared base of the flower.

We get such a middle


Next, turn the flower upside down. And glue another row of petals, placing them tightly one to the other.

flip the flower


Thanks to this series, the flower will turn out more magnificent and voluminous.

flip the flower


Now, from the green ribbon, we prepare leaflets for decoration. To do this, take a rectangle with sides 6.5x5 cm.

prepare leaflets


From it we cut out leaves connected at the base.

prepare leaflets


Carefully scorch all available slices.

prepare leaflets


We get such leaves, they will need 3 pieces. Then we attach them to the base of the flower.

We get such leaves


Then glue the elastic, attaching it in the center of the flower.

Scrunchy


Then, from a green ribbon, cut out a small oval-shaped part with two notches, which cover the junction of the flower and the elastic.

Scrunchy


After that, we turn the flower face up and on the edges of all the petals of bright pink color, draw a contour with sparkles.

Scrunchy


We get such a charming chrysanthemum!
come back
Comments (0)

Read also

Error codes for washing machines