DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Making a box" Blue Lights "
Such a box will be used to store creams, hairpins, elastic bands, and other hair ornaments.

box making


To work, we need:
- scissors.
- empty box.
- the cloth.
- tapes of different widths, blue shades and a little green.
- a garland of blue beads.
- needle with thread.
- Moment glue.
- corrugated paper.

Take a cardboard box


We take a cardboard box and gently glue it with a cloth using glue "Moment" the entire external surface. And give time to dry.

glue the cloth


In the meantime, we begin to make flowers from ribbons. We take a blue ribbon 5 cm wide and 40 cm long.

Take the blue ribbon


We take and bend the corner 90 degrees and fix with a needle.

bend the corner


We twist the bent corner along the length of the tape and fix it with a needle.

Twist the bent corner


Holding the bottom of the future flower, turn the ribbon up and immediately scroll the flower clockwise, each curl is fixed with a needle and thread.

turn the tape


How many turns we make, there will be so many flower petals.

How many turns we make


Having made several petals, we fix the finished flower.

Making a few petals

Making a few petals


In the same way we make three large flowers. You can have different shades of blue.

make three large flowers


And now we take ribbons 2.5 cm wide and 30 cm long. And we make four flowers. These flowers are smaller.

make three large flowers

make four flowers


Now, these flowers are alternately sewn to the lid of our casket.

sew to the cover of our casket

sew to the cover of our casket


We fix three large roses next to each other in the lower right corner.

We fix three big roses

We fix three big roses


Next we fix two small roses.

We fix three big roses

fasten two small roses

fasten two small roses


Now we take a green ribbon 1 cm wide.

take the green ribbon


Make a curl resembling a petal. We insert the needle from the inside and bring it inside out, cut it and leave small tails.

Make curl

fasten with a needle from the inside

fasten with a needle from the inside


With a needle, we fix the green petals from above in the right direction.

fix the green petals


And we fix everything with the needle from the inside.

fasten with a needle from the inside


On the front side, roses are obtained and between them are green petals.

fix the petals


For small roses, we also fix the petals, but with ribbons of smaller width.

It's time for the garland


When all the flowers and leaves are fixed, then the inside of the green tails should be carefully glued.

We place them on the box cover


It is time for a blue bead garland. We place them on the lid of the box and glue the “Moment” glue.

We place them on the box cover


But so that the casket inside is also beautiful and neat, we glue the entire inner surface with yellow corrugated paper.

Casket


Thus, we close all the threads and ribbons on the lid. You can also use a mirror or a flower to decorate the inside of the lid.

We place them on the box cover


To decorate the side walls, we also use blue and green ribbons. We cut four green ribbons of 14 cm and fasten in the shape of an eight.

blue and green ribbons

blue and green ribbons


We make 4 very small flowers from a thin blue ribbon. On the front side, we fix two green eights in the corners in an upright position and in the middle we glue on the blue flower. And the other two green blanks are glued from two sides, but in a horizontal position.

Casket


On this box is ready. Good luck to all.
come back
Comments (0)

Read also

Error codes for washing machines