DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Flower for curtains
The interior of the apartment plays a big role in human life. Sometimes even the smallest details can significantly raise the mood and bring comfort, which is so necessary for residents of the metropolis. Sometimes, even such a trifle as a catch for curtains can radically change the appearance of a room. But finding the right ties in stores by color, texture and price is sometimes very difficult. That is why it is better to start creating them yourself. For work, I needed:
  • satin ribbon 2.5 cm wide;
  • scissors;
  • pencil;
  • ruler;
  • lighter;
  • beads;
  • clothespin for curtains.


I needed


First of all, we cut the tape into segments, 6 cm long. I say right away, it took a lot!

cut the tape into pieces


Now we carefully follow and catch the thought. The segment is folded in half along the length, inside out and cut the corner with a fold, something like this.

we cut a corner with a bend


I trimmed the upper left corner. The edges are neatly fastened with a lighter or a soldering iron. We get such a corner.

We get such a corner


Let's take the opposite side. We connect its ends so that a ring is obtained. Fold in with the front side inwards. We fix it all with fire.

Fix it all with fire


Thus, you need to redo all the segments.

redo all segments


When all the preparatory work is completed, we begin to collect the flower. As a basis, you can use cardboard. When choosing the diameter of the base, do not forget that it will eventually increase by at least 10cm due to the petals.

As a basis


Having previously drawn the circles, we begin to stick the petals to the base. It’s better to start with a cross, and then fill in the blanks.

make a cross


So, gradually glue the entire base.

glue the whole base


The middle of the flower also assigns a role. To do this, took a piece of tape 20cm, scissors and a lighter.

piece of tape


Carefully with scissors she made cuts along the entire length to about the middle, and slightly singed the ends.

made cuts along the entire length


Next, we drip a drop of glue onto the ball from the pin and apply it to the whole edge of the tape from the wrong side.

drip a drop of glue


Thus, gradually adding glue, twist the entire tape. Immediately after twisting, I carefully pulled out the needle and glued the resulting middle in the center of the flower.

glued the resulting middle

glued the resulting middle


Now, abundantly fill the top of the center with glue and glue the beads on it. In this case, such a center of the ribbon is not a decoration, but a stand for beads. They are almost on the same level with the petals and look more harmonious.

glue the beads


The flower itself is collected, now it's time to think about the clamp. In this case, you can use any device that can assemble your curtains. Most often they use hairpins, but I was lucky because I had one special clothespin free. I glued it to the back of the flower with glue.

glued the clip for the curtain


And so now my curtain with such a stunning flower looks like.

Flower for curtains
come back
Comments (0)

Read also

Error codes for washing machines