DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »Needle case" Silhouette "
Good afternoon. I am delighted when I see beautiful and original needle beds. If you also like a variety of needle beds, then I welcome you. Today we will make a silhouette needle bed together.
For this we need:
- Paper.
- A pencil.
- Sintepon.
- Scissors.
- The cloth.
- Wooden sticks for barbecue.
- A needle.
- Threads in the color of the fabric.
- 1 cup of yogurt.
- Plasticine.
- Decorative decorations.
- Foam rubber.

First, we will make a paper pattern of our silhouette.

pattern of our silhouette


Then we take the fabric, fold it in half with the front side inward. We put the pattern on the material, fix it with needles (so that the pattern does not move) and cut it out according to the pattern, taking into account allowances for the seams.

cut by pattern


We remove the pattern and stitch the workpieces, while the bottom stitching is not yet necessary. We turn our product face out.

stitch blanks


The resulting silhouette is filled with a synthetic winterizer. Insert the wand inside and sew. If necessary, one end of the stick can be spread with glue.

we stuff a synthetic winterizer


Now you need to make a skirt. For this, I took a white fabric with a patterned edge. I cut three strips 5 centimeters wide, 12 centimeters long. First, we sew the bottom of the strip, not forgetting to make folds. Then we sew the second strip above and do the same with the third. As a result, we get a three-level skirt.

make a skirt


Now take a glass of yogurt and make a stand for a needle bed out of it. To do this, simply cut off the excess height from the glass.

take a glass


We glue the stand with a cloth. Put plasticine inside the glass. At the same time, it must be pressed to the bottom of the glass so that the clay holds firmly.

Glue the stand with a cloth


Take a thick foam and cut out of it a shape suitable for our stand, only 0.5 centimeters larger in size. We cover the foam with a cloth and insert it into the stand. Here we have such an ottoman.

Take thick foam


In the middle of the ottoman, stick our wand with the needle bar. It is necessary to stick in so that the stick goes into the plasticine for fixation.

Needle Box Silhouette


From fabric to the color of the stand we will make a belt for the skirt. Cut a strip of 3 centimeters wide, 12 centimeters long. Fold the strip with the front side in half in width, sew, twist. We tie a mannequin at the waist, make a bow at the back. We decorate the needle bar with decorative details. I made beads and stuck a flower on a skirt. If desired, you can decorate the stand. Our needle bar is ready.

Needle Box Silhouette


I wish you success in your work.
come back
Comments (0)

Read also

Error codes for washing machines