DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »Knitted dress for girls
A wonderful dress can be knitted from the remains of yarn for the girl. For such a dress, knitted in two knitting techniques, only 240 g of CRYSTAL-type yarn was used, where the length of the thread per 100 g is 500 m. The yoke in the dress is crocheted with a “scale” pattern and the main fabric is cross-knit using shortened rows. Whoever does not have a machine can easily be tied with his hands or crochet, using the same method of partial knitting. We knit a sample in stocking and calculate the density. I have it 3.5 p / 4.5 p. For a long dress for a height of 110 cm, gain 150 working loops on a single-contour machine. This is a calculation for the height of the main canvas of 45 cm. If you want a short dress, then dial a smaller number of loops.

We distribute the threads by color, we will knit like this:
  • 4 full rows of red thread;
  • 4 rows of purple;
  • 4 rows of yellow;
  • 4 rows of white;
  • We translate 52 loops from the RP (working position) to the PNP (front non-working position) and knit further:
  • 4 rows of red thread;
  • 4 rows of purple.

We translate another 52 loops from RP to PNP. We now have 104 loops in the PNP. We knit 4 more rows, already a yellow thread.
We extend all the loops in the RP and start knitting from full rows, but now we have a shift, and the first one will be white, then red, purple and yellow.
Continue knitting shortened rows, another 8 rows. The color will shift to full rows again. We knit a cloth of 336 rows.

Remove the canvas from the hinges


Remove the fabric from the loops and sew it on a typewriter, or connect a knitted seam.

got a skirt


We got a skirt flared down.

lace 4 rows of scales


Now you need to tie 4 rows of scales to her lace. In the same order of alternating colors as the main canvas. To do this, we collect a chain of air loops, equal in length to the bottom of the skirt, you can slightly more. We close the chain and knit lace "scales".

Finish the lace


We do not finish the lace with the scales themselves, but we knit another row above them.

Tied with red


We tie the narrow part of the skirt, that is, its top, with red thread.

Knitting one row


Having knitted one row, mark the side “seams” of the canvas with some thread or pins.

start to knit a number of scales


Having departed 3 cm from the intended line, we begin to knit a number of scales with red threads.

we knit a number of columns


Over the red scales we knit a row of double crochets of the same color, and the next scales will be purple and. ect.

Knit


We knit 3 times 4 rows of scales, and on top we knit the shoulders. To do this, we knit from the edge line 12 loops s / sn in three rows on each side.

cut all unnecessary threads


From the wrong side, we cut off all unnecessary threads and hide them in the extreme loops of the rows.

We begin tying armholes


We begin tying the armholes and shoulders with red thread very densely, using 2 s / sn with a common top. This will allow you to make a beautiful edging on the top.

it remains to sew our lace


Now it remains to sew our lace to the hem of the skirt.

we wash


To do this, we attach it to the lower edge of the panel.

Attach on a typewriter


Attached on a typewriter.

a nice strip of holes remains


The lace at the top remains a nice strip of holes in the picture. They can be left untouched, or you can stretch a satin ribbon or thread.

tie the buttons with red yarn


For the fastener we tie the buttons with red yarn. Starting with an open loop, which we then tighten. It is also called the amiguri loop. We leave the long end, and then sew the buttons on the rear shoulders. On the right, 2 buttons can be sewn tightly, but on the left, leave one to the neck so that the head can crawl through.

Knitted dress


The dress is ready! And how much my granddaughter likes it! Barely took off.

Knitted dress for girls
come back
Comments (0)

Read also

Error codes for washing machines