DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Casket - case for storing small items
Hello, dear visitors of the site. Today I present to you the original box - a case for storing small items, which can be made manually, from simple materials at hand. In it you can put items such as silver or gold chains, pendants, beads or beads, small decorative little things for needlework. But, in addition, there you can store earrings and rings.

DIY jewelry box


To make such a case you will need:
one). Fabric (I took the inner fabric of dark red color from my old jacket) for sewing the outside and fabric of a different (orange) shade for the inside;
2). Cardboard paper;
3). Scissors, threads of suitable shades, needle;
four). Cotton or batting;
5). Lightning;
6). Beads, beads or a piece of fabric of a different color (to create a small decoration on top).
7) Glue, colored paper, compasses.

materials for casket


First, we cut out two identical round figures of very large size from cardboard, drawing them with a compass. However, inside each of these circles you need to draw another circle, one third smaller than the main figures in size. Jokes one of these circles to the fabric, prepared for sewing the two outer sides and folded in two, cut along the contour of the part. After that, by cutting the cardboard sample in a circle drawn inside, also make two parts from the fabric prepared for sewing the inside:

cut out of cardboard


Now we sew the details of the outer sides with cardboard circles:

we sew details


Having almost done it, fill the free space between them with cotton, and then sew it up:

fill with cotton

 where the cardboard details are orange with


Sew to the side where the cardboard, orange details, trying to make the fabric stretch evenly and smoothly:

Sew orange details


Next, we sew the zipper. First, I decided to combine the two most suitable for the box in color into one:

berm sewing on zipper

berm sewing on zipper


But the closing device then jumped out of the lightning and could not enter back, which was why it was necessary to replace it:

closing device popped up


Having sewn the zipper completely, we take a small piece of fabric to sew in the back an empty side section in which there is no zipper.
Sew this piece of fabric (if desired, you can decorate it with beads):

to sew back an empty site

Sew this piece of fabric


Then we take a small piece of orange-colored fabric, and, having rolled it, we sew it on the back and sides, after which we bend back the sides (so that it is not visible in front of the seam). Next, sew it to the depth of the case along with several beads on the sides:

we sew on the back and sides


We cut out two “rings” from the satin colored paper for the frame and draw equal circles along the radius of each — bending lines — so that the distance between these circles and the sides cut from above and below is equal. Then we cut with scissors from the center to the planned bend line:

Cut from satin colored paper


Bend the trimmed ends down and glue:

glue


Glue both frames to the inside of the case:

beads or beads


Next, take a thread and string beads or beads on it:

string beads or beads

string beads or beads


Sew to the case on the back:

string beads or beads

Sew on the case back


Now do the decoration. It can be made either from beads by simply sewing them on, or made in the form of a flower sewn from fabric.
To sew a flower, take a long rectangular piece of fabric and, stitching the seams on three sides, twist:

Now we make decoration

Now we make decoration


To make a jewelry out of beads, we select the appropriate ones in size and sew on:

make bead jewelry

sew bead jewelry


We choose one of these jewelry that we liked more.
And that's it, our little casket - the case is ready. Its main difference from deep caskets is that it is difficult to lose any small object in it.

sew bead jewelry

Casket


Sincerely, Vorobyov Dinara.
come back
Comments (0)

Read also

Error codes for washing machines