You will need a patch of tulle or another fabric consisting of a mesh. Size 20 cm by 40 cm. For decoration you need pink rhinestones and a middle for a flower. The flower itself is created from a ribbon, it takes about 7 pieces of 4 cm each, totaling about 30 cm of a satin pale pink ribbon, whose width is 4 cm. For side branches, look for two white segments of 4 by 4 cm and two pink ones. To fix everything on the glass, use glue. The glue gun is ideal, because its glue resembles a transparent plastic, perfectly holds the material and does not have a bad smell.
Let's start creating seven petals for the main flower. To do this, we cut the pink ribbon into blanks, that is, 4 by 4 cm squares. We bend the square as in the figure.
Then bend the workpiece again in such a way as to make a triangle.
Now you need to bend the work evenly. Try to make a sharp beautiful corner, do not rush and then everything will turn out! Lock with tweezers all the layers.
To create an inverted petal, it is necessary to trim the base of the workpiece so that when it is bent, it can be fixed and not bend back. Cut with scissors not parallel to the base, but at an acute angle.
Burn the base of the petal with a lighter, with this action all the layers are soldered together and you get a petal for the flower.
Turn the petal out, if the base (the part that is closer to the middle) is strongly sticking out, then trim it.
Cut a circle with a diameter of 1-1.5 cm from the tape and paste 7 identical pink petals on it.
To decorate the middle of the flower, a large rhinestone or top from a hairpin, which is used to decorate wedding hairstyles, is suitable. If you have such a mess, then her “hat” will be the best floral center. Prepare a piece of ribbon and tulle to create a “skirt” at the wedding glass.
Stick this piece to the place where the legs of the glass go into the base, it is more convenient to attach a “skirt” to the tape. If glued to a glass, then there is a high probability that the grid will simply fall off the glass.
Bend the material almost in half, stepping 1-2 cm from the bottom edge. This is necessary so that the skirt has 2 tiers and seems more magnificent. Sew the net with large stitches, constantly pull the thread.
You should get something like this fluffy skirt.
Glue the skirt around the legs. Be sure to glue the junction, otherwise everything will stick out in different directions.
Now paste the flower in the middle of the glass. Symmetrically make a flower twigs of white and pink petals.All empty space can be decorated with rhinestones. It is necessary to close the place of sticking the skirt with a pink ribbon, tie a bow and also randomly decorate the entire skirt with pink rhinestones. A glass for the newlyweds is ready.
