DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Create gum" Asterisk "
Before you start creating this jewelry, you should prepare for work:

Create a gum Asterisk


Material:
- Satin wide bright red ribbon.
- rubber.
- Medium size pink blossom beads.
- decorative sequins in the form of small stars.
Tool:
- scissors.
- tweezers.
- lighter.
- a gun for working with hot glue.
- threads and needles for handicrafts.

Work sequence.

1 Making petals.
For the petals you will need 10 parts measuring 5x5 cm. Since the width of the prepared tape already has 5 cm, you only have to cut the required length. Then from each square you need to get a triangle by folding it in half. And then another step to add the part in the middle.

Making petals


Holding the resulting triangle with tweezers, you need to pass the sewing thread into the needle and make a small line along the edge of the longest side of the part. The needle should pierce all additions and connect them together. Depart from sections by 3 mm. Having made a line, the thread does not need to be cut.

Making petals


After this, you need to pull the thread of the done seam so that the material is gathered in uniform folds. By doing this, you can sew two tack stitches and cut the thread.

Making petals


Further, at the obtained part, you need to burn sections with a flame in order to protect the part from shedding of fabric.

Making petals


This is how you should get a petal. The same instances you need to make from the remaining squares.

2 flower mix.

The flower consists of two rows, each of which is created separately. Of the five petals you need to make a small circle, glueing the glue on the parts along their side.

Flower mix


With this action you completed the first row. Further, the remaining parts must be glued to the bottom of this circle. But you should arrange the petals in between the details of the first row.

Flower mix


Next, you need to glue the beads in the center of the flower to hide the place where the petals are glued together.

stick beads


Next, you need to carefully glue three decorative stars on the edge of each petal. This should be done carefully so that the glue does not fall on other parts of the petals, spoiling their beauty.

Create a gum Asterisk


Now you need to turn the flower over and attach a rubber band in its center.

attach rubber band


The flower is completely ready, congratulations!
come back
Comments (0)

Read also

Error codes for washing machines