For work, we need:
- 100 gr. transparent soap base;
- 50 gr. white soap base;
- cottonseed oil;
- avocado oil;
- flavoring Egoiste Platinum from Chanel;
- liquid pigment green;
- liquid pigment blue;
- mother of pearl silver;
- alcohol (to remove bubbles);
- molds;
- plastic cups;
- stick for stirring;
- electronic balance;
- knife;
- cutting board.
First you need to cut into small cubes 30 grams of a transparent base.
Then, put it in a cup and put in the microwave. It is advisable to use the mid-low frequency mode. At maximum, everything will melt much faster, but cups cannot withstand this temperature. The base must not be allowed to boil.
Then you should add avocado oil (a third of a teaspoon) and 3-4 drops of blue dye.
In order to avoid the migration of paint in soap, you need to use pigments and 3-4 drops of flavor.
At the next stage, everything should be gently mixed, sprinkled with alcohol, pour the mixture and again sprinkled with alcohol.
The shape does not matter, the main thing is that it be flat, since in the future all the workpieces will need to be cut.
Next, you should cut another 30 grams of the transparent base, melt it and add the following components by analogy with the first option, only instead of the blue dye, you need to take green, then pour into the mold and sprinkle with alcohol.
In the next step, you need to cut 30 grams of a white base, melt, add cottonseed oil, flavor, mother of pearl (at the tip of a knife), mix everything and pour into a third form. Be sure to sprinkle with alcohol.
After 30 minutes, all layers will harden and they can be removed from the mold and cut into cubes.
In a large mold in which you will prepare the soap, you need to place all the colored cubes, after sprinkling with alcohol and cubes and the form. This will prevent them from sticking to each other.
Next, you should cut the remaining transparent base (40 grams) and let it melt, then add a couple of drops of aroma to it and pour the cubes with this liquid.
Please note that you cannot add oil at this stage of the operation, as the liquid may become cloudy. Necessarily the amount of transparent base (at the last step of the work) should cover all diced cubes.
After 10-15 minutes, when the top layer of soap dries a little, you need to melt the remaining white base (20 grams) and fill the top layer, after sprinkling the previous one with alcohol.
As a result, you should get a white smooth surface on one side and transparent with colored cubes on the other.
Now you can delight loved ones with a useful and beautiful gift!
