Let's get started?
To start, we will prepare everything you need:
- pliers
- pliers
- side cutters
- 10 coral beads with a diameter of 8 mm
- 3 white oval beads 1 cm long
- 8 pale pink crystal beads
- chain with small links
- hugs
- carbine
- pins with round ears
- rings for fastening
- accessories according to your desire (I have wings, butterflies and shells)
Have you prepared? Then let's get started soon!
We string a hug on the pin, then a coral bead, behind it again the hug and bend the pin with your hands.
If your pins are long, like mine, then we take side cutters (or nippers in the common people), and bite off the pin, leaving only 1 cm.
Now we need to make a loop, the same as we already have on the pin. To do this, take the pliers and grab the edge of the pin. Holding the pliers tightly, we wrap the pin in the opposite direction to the one where you bent the pin with your hands. A little practice - and you will get smooth loops.
Do the same for the rest of the beads. I only put hugs on coral round beads and white oval beads. I will mount crystals without hugs. You choose for yourself, hugs in this case are just decoration and give our beads a little lace effect. If you don’t have any hugs at all, you can do well without them.
At this stage, I prefer to lay out the beads in front of me in the order in which I would like to see them in the finished product and only then assemble them. Having experimented a bit, the beads formed in a certain order and you can start assembling, which I will start in the middle. So, with the help of the ringlets we just made and the pliers, we attach the beads to each other. And remember the important rule - you need to securely close all the rings with pliers so that the product does not tear during socks. The middle is ready.
We continue to collect individual parts of our beads and lay them out in the correct order so as not to get confused.
It remains to connect these parts in chains. We measure 10 segments of chains, approximately equal in length.
And carefully with the help of round-nose pliers we fasten the chains for the rings of pins. The middle is done.
We fix the following parts.
We turn to the fastening of beads with metal figures.
The last beads are attached.
And to them and the last chain.
We attach a carabiner to one of the chains with the help of a ring for fastening.
We attach a ring for fastening to the second chain.
It remains to attach the wings. We will attach them to the loops of the pins with the help of rings for fastening.
Our beads are ready!
You can choose beads of any color, size and any shape. Accessories can also be different, in a golden or silver tint. You can also make such beads two, or even three times longer, and layering them, adjusting the length depending on your desire and the neckline of the top, blouse, T-shirt or T-shirt.
