DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »Get ice? Instantly?

Liquid - sodium acetate, sodium acetate, if in a simple way. Get at home - just spit. Take baking soda and vinegar, and even better - vinegar essence - you will have to evaporate less. Combine them gradually until a neutral reaction occurs, that is, until the hissing stops. There is no need for special accuracy and purity. Evaporate, cool, get a monolithic piece. maybe the solution will still remain on top, if it was not evaporated enough, drain it off. What remains is sodium acetate, or rather, its crystalline hydrate. It’s easy next. Put on fire, your piece melts. Gently pour the transparent melt into another bowl to get rid of sediment and debris at the bottom. Pour the hot melt into a transparent glass, cover it with a dusting cloth to prevent it from freezing prematurely, and cool to room temperature. Liquid is liquid. But it is worth dropping a tiny grain of the same sodium acetate (you can get it from what remains after the drain), as the liquid hardens before our eyes! The composition can be used repeatedly! Good luck!
Tea
come back
Comments (13)
  1. Zummer
    #1 Zummer Guests April 18, 2011 08:07
    0
    ATP try =)
  2. Zummer
    #2 Zummer Guests April 14, 2011 08:27
    0
    I can’t even do it, I mixed soda with vinegar, waited until white salt remains, then poured a bit of water, cooled it in the refrigerator, I throw a grain of salt and nifig, I touch it with my finger, what am I doing wrong?
    py.sy already spent all the vinegar)
  3. [) eNiS
    #3 [) eNiS Guests April 14, 2011 11:14
    0
    I did the first video, I did it, though I stink of the whole house with vinegar))
  4. Zummer
    #4 Zummer Guests April 14, 2011 12:50
    0
    I xs how much it all depends on vinegar or soda (year of production), I tried to do it several times. no way .... I pour a lot of water, or vice versa, but it doesn’t want to react, it’s written in the description below, they say to first evaporate everything to a powder, and then to melt the powder, I set it to melt (without adding XD water) it melted but formed Pts a little liquid and it was overflowing from everything) after exhausting all the vinegar in the house, I decided to leave a comment here (in the hope that they would help) and do more native-soldering of electrical circuits)
  5. [) eNiS
    #5 [) eNiS Guests April 14, 2011 13:05
    0
    I also did little, but even so it turned out)))
  6. Zummer
    #6 Zummer Guests April 14, 2011 13:12
    0
    plz describe the process) well, after steaming, you got crystals all over the bottom of the dish, and then .... filled with boiling water? cry
  7. [) eNiS
    #7 [) eNiS Guests April 14, 2011 21:12
    0
    shorter mixed vinegar with soda. put on the stove, forgot about this thing. remembered when he lit up the burnout. removed from the stove, the contents of the fire were charred (well, do not throw this black rubbish to me) I left to cool. poured cold water like)) and put it outside under a napkin. after 12 hours I remembered and went to test))) The solution was somehow gray with gray, but for that it froze when I threw a match there
  8. Zummer
    #8 Zummer Guests April 15, 2011 09:02
    0
    nothing new) but all the same ATP, but to put it on gas and forget about it, I don’t feel sorry for the vessel (in principle, I waited until the salt itself began to melt, but there was so little solution, and in some places it started to solidify, was cloudy grayish even color, I poured boiling water over it, it dissolved but when it cooled down it didn’t want to harden sad
  9. [) eNiS
    #9 [) eNiS Guests April 15, 2011 11:05
    0
    I did it on an electric stove. I tried in a jar of condensed milk for example. Pour vinegar and a dash of soda onto the bump of vinegar, the reaction of the duster is also gone, etc. until the hissing ends, I waited about 2 hours)
  10. V.A.L.E.K.
    #10 V.A.L.E.K. Guests December 29, 2012 10:12
    0
    and the pan doesn’t spoil
    and then once ruined the pan: recourse:
  11. Vyacheslav
    #11 Vyacheslav Guests January 15, 2013 05:45
    1
    I took two bottles of vinegar 70% 160ml each in a three-liter jar., I added filtered water to a glass somewhere (this would mix everything well). then a pack of soda 500 gr. Let’s settle down. Pour into enameled. the pan. We leave the sediment at the bottom. Sludge is extra soda, it can also be put out with vinegar and after settling, also pour into a pan. We evaporate, but not until dry. A film appeared on the surface - this means the solution is oversaturated. What you need. We pour everything into a bottle and cool it. [Center] [img] http://washerhouse.com/3/en/pictures_users/1/13.jpg [/ img] [/ center]
    Tip: When melted again, we always pour into clean containers. Crystals are always left in the old one and the solution will crystallize upon cooling.
  12. Maksim
    #12 Maksim Guests September 25, 2013 18:38
    0
    Cool everything works.
  13. cop5
    #13 cop5 Guests January 25, 2014 15:41
    0
    wow, but I managed to make ice an air freshener and water, but the truth then stank of chemicals around the house

Read also

Error codes for washing machines