DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Flower heart
Sometimes I really want to beautifully draw a photo or picture around the edges, but it is not always possible to buy a finished frame. Often such a little thing is much more expensive than its appearance and does not always correspond to your desires. I propose to solve this problem with the help of needlework. To make such a floral frame in the shape of a heart, I needed the following materials:
satin ribbons of 0.6 and 12 mm;
wide-eye needle;
the cloth;
hoop;
plain thread in tone to ribbons;
scissors.

satin ribbons


First of all, with the help of a plastic blank (we can do it by hand), we outline the contour of the future heart.

mark the outline of the future heart


On my own, I decided to use two types of flowers, so I designated them with two types of drawings.

two kinds of drawings


I apologize for the irregularities, the artist from me, of course, is not important). I decided to start with spider-roses. To embroider them, you need to make five stitches from the edge to the center with a simple thread in the form of a spider web.

make five stitches


Now proceed to the tapes. From the center of the first web we bring out the tape.

autinki output tape


Now we begin to bind the thread with tape. To do this, draw a tape over the first stitch, then under the second.

draw the tape over the first stitch


Gradually, the first and second stitches will change places.

stitches will swap


We continue this until the rosette acquires the required dimensions.

will get the right size


It is not at all necessary to make all the flowers with one tape. I decided to make the rest of the roses with a ribbon of a different color.

make a ribbon of a different color


Using the same technology, we continue to make as many roses as we planned.

continue to do so many roses


Now you can do the rest of the flowers. To do this, we draw a narrow ribbon from the line of the inner circle, and end the stitch a bit behind the line of the outer circle.

a narrow ribbon from the line of the inner circle


So that such a flower does not lose its beauty against the background of roses, I decided to make it two-tone.

finish the stitch


To fill the middle of these “daisies” I used the French knot embroidery technique. At the intermediate stage, the work looks something like this.

make it bicolor

french knot


It's time to green our clearing a bit. With the help of a narrow green ribbon and ordinary sewing stitches, we depict leaves and stems.

ribbon embroidery technique


It is important not only to sew stitches in green in a chaotic manner, but to give the rosebud a finished look. So the work will look much more real and attract the eyes of all guests. The work is ready.

Flower heart


So, at the slightest cost, you can easily build a beautiful frame yourself.
come back
Comments (0)

Read also

Error codes for washing machines