This trouble is solved in three ways. Firstly, you can strengthen the ventilation mode. To do this, use a special fan, which is built into the exhaust hood of the bathroom and turns on if necessary. Secondly, the installation of a shower cabin that saves steam inside will come to the rescue. This, of course, is not cheap, but very effective.
The third method is simple and almost free. It consists in rubbing the mirror with a simple shampoo. This is done during normal cleaning, when the mirror is washed and wiped dry without streaks. A drop of any shampoo in the house is taken and applied to the mirror surface. Grinding this droplet with a dry cloth will not be difficult. The procedure will take only a few minutes and will not leave marks on the glass. The mirror will look as usual.
Do not take too much shampoo, as it will have to be rubbed for a very long time until there are no stains. It will be enough ½ teaspoon for a mirror measuring 50 × 70 cm. The brand of shampoo does not matter.
The result appears immediately after the water procedures. The walls and ceiling of the bathroom are covered with evaporation, while the mirror remains unchanged. For comparison, I first covered only one half of the mirror with shampoo and evaluated the result immediately after a shower. The result is enough for 2-3 weeks. Then the procedure will have to be repeated.
Thus, a simple folk method to keep the mirror in the bathroom without fogging works one hundred percent. A little zeal in rubbing shampoo on glass and light steam!
