DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Flower" Pansies "
Massive jewelry has always distinguished creative and bold natures from the crowd, and now it has become a must-have in the fashion world. Today, the larger and more noticeable the ring, the more accentuated the sense of style and following fashion trends, the more the attention of others is riveted. Massive rings for several seasons in a row flash on the world catwalks. And if such a ring is also made in the form of a flower, which is very important for the spring and summer, then it will further emphasize the impeccable taste of its owner.
Today we’ll try to make such a fashionable jewelry with our own hands. We will sculpt a pansy flower, followed by a connection to the base ring.

Pansies

Pansies


For the hand-made production of such a remarkable decoration, we need the following materials and tools:
  • four small blocks of polymer clay - white, black, yellow and purple;
  • stationery knife;
  • thermal gun tucked with glue stick;
  • base for silver ring.


materials and tools


Separate from the purple whetstone about two-thirds of the material, knead and roll out a sausage with a diameter of 5 mm from it. The purple clay used in this case contains interspersed with purple spangles, which in the future will give the decoration an additional charm.

sausage


From a small piece of black clay we fashion a strip of length equal to the length of the finished sausage. We apply the resulting element on top of the purple blank.

pieces of black clay


We squeeze the workpiece as much as possible and cut it into elements 4 mm wide.

cut into small sticks


We compress the received elements together.

We compress the received elements


We cut the resulting workpiece across and mirror the resulting parts.

Cut the resulting workpiece


We roll out the white and purple sausages so that the white workpiece is about one and a half times longer than the purple one.

Roll out white and purple sausages


We cut sausages into identical segments - 4 violet, 6 white. From the obtained pieces we will perform a smooth color transition, so for convenience we lay them out on working heaps, as shown in the figure.

chopped


We mix the colors - leave one purple segment intact, mix the second and knead well with one white piece, the third with two white pieces, etc.

mix


The resulting colored elements are stretched and superimposed on top of the previously made striped workpiece, giving that petal shape.

form a petal


We crush and stretch the workpiece, making it more like a flower petal.

form a petal


Cut off excess material from the sides. In the future, it will still be useful to us.

form a petal


Our billet has a very large thickness, we will take advantage of this and cut it across.

form a petal


We continue to form the shape of the petal, crushing and stretching one of the obtained elements until we get a beautiful petal with a gradient.

form a petal


We make the second petal as similar as possible to the first, after which we proceed to manufacture the double lower petal according to the principle similar to the manufacture of the previous floral elements. We make a blank of yellow sausage and two clay stripes - black and white.

clay sausages


We press the workpiece and cut into segments.

chopped


We carry out the pressing.

we knit


Cut across and mirror-connect.

form a petal


We give the workpiece a heart shape and fill the void between the sides with white clay.

form a petal


Knead the clay that was cut before until we get a plain material. At the same time, we knead and spread a strip of white material on the working petal. Place a light purple strip of clay on top.

form a petal


Crumple the workpiece with your fingers, forming a petal.

pansy flower


Sculpt two simple light purple petals from the remaining material.

pansy flower


We connect the obtained elements and additionally fasten them in the middle with a ball of yellow clay.

pansy flower


We bake the product according to the instructions attached to the polymer clay. Let the flower cool and glue it to the base ring with a hot glue gun. The unique Pansy ring is ready!

making a flower ring
come back
Comments (0)

Read also

Error codes for washing machines