DIY do it yourself
Master classes, instructions, useful tips, recipes.
Glasses for the bride and groom are a special attribute of the wedding table. Newlyweds throughout the event are in the spotlight, so everything that surrounds the couple should be beautiful and memorable. Making wedding glasses has become a tradition. Glasses are decorated with ribbons, beads, lace, flowers from cold porcelain or beads. Jewelry is glued to glass with super glue.

Let's try to make wedding glasses with our own hands. For this glass from our photo we need satin ribbons of white color 0.5 cm wide, super-glue and scissors.

wedding glasses


We will wrap the glass with a satin ribbon. You don’t need to cut the tape right away, we’ll do it after part of the ornament is glued to the glass. Gently grease the tape with glue and start sticking something like this.

Satin ribbon


We do the same on the back of the glass.

doing the back side


And from two opposite sides we make two more such elements, in total four will turn out.

make two more such elements


Wrap the glass leg with the same tape, do not forget to lubricate the tape with glue first.

Wrap the glass leg


Now set the glass aside, let it dry out a little. During this time, we will make five of these bows from the same satin ribbon.

make from the same satin ribbon


Glue four bows on the glass at the top of the pattern.

We stick four bows


And the fifth bow should be glued to the bottom of the legs.

stick on the bottom of the legs


This is how simple it is to arrange wedding glasses.

The second glass is made in the same way. You can diversify and make a glass for the bride from a pink ribbon, and for the groom - from blue.

Needlework stores sell a variety of ready-made lace or sewing. This is a great material for decorating wedding glasses. In addition to lace, we need pearl beads, gold or silver braid for sewing and good glue to decorate glasses. We will try to make such a glass out of these materials.

make wedding glasses


From a piece of lace we cut out a beautiful ornament.

lace cut out a beautiful ornament


The cut out pattern is gently lubricated with glue and glued to the glass. Remember that super-glue dries very quickly, so it is better to apply glue not to the entire surface of the lace at once. It is better to lubricate part of the pattern with glue, then stick it on the glass, then grease part of the lace again and repeat the procedure. And so on until you stick the entire pattern.

stick a pattern


We will decorate the leg of the glass with beads. Glue them in a circle on the bottom of the legs.

Businoforming


Then we do the same with the upper part of the leg.

leg beads


When sticking jewelry on glass goblets, you need to ensure that glue does not appear on the surface. This may spoil the appearance of the appliance. It is best to use a waterproof, transparent glue that will not leave any marks when dried.

From silver or gold braid for sewing you need to make two rings and stick them on the base of the glass.

wedding glasses


We make the second glass the same as the first. Such glasses will not go unnoticed on the wedding table.
come back
Comments (0)

Read also

Error codes for washing machines