DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Wedding box for money or rings
Wedding box


To create this original box you will need:
• a box from a mobile phone, scissors, a needle and thread;
• a piece of pink satin and double-sided tape;
• the width of the organza ribbon: white - 5 cm, yellow - 4 cm, orange and light green - 2.5 cm each, a piece of tulle;
• width of a floral tape of white and yellow color and a white openwork lace for gifts - 4 cm;
• a thread of small white beads, 3 large beads for pearls, two rings of gold;
• stamens are white and orange.

for the box you will need


Initially, it is necessary to make the box itself, and then proceed to decorate it.
So, carefully disassemble the box and lay it on the fabric. Make allowances of 1 cm on all sides and cut.

disassemble the box


Using double-sided tape, glue the box with satin (lightly scorch the edges of the fabric to avoid shedding). Sew a fabric joint on a cover from the wrong side with threads to tone. On the front side of the bottom of the box, sew the satin with a hidden seam in the places of its imposition.

Sew the satin at its overlay


Using polymer glue, fix the floral tape around the perimeter of the box cover (glue the yellow flowers from the tape at the corners, then the white tape). In order to close the junction of the fabric at the end of the box cover, sew a string of beads with a hidden seam.

fasten the floral braid


We begin to make flowers and leaves from organza to decorate the cover.
White flower. You will need 21 cm of white tape with a width of 5 cm. Lay a stitch with six U-shaped bends, leaving a 3 mm allowance from each raw edge.

making flowers and leaves


Evenly distributing the folds, pull the tape and, having formed a flower, fasten the thread.

Evenly distributing folds


Twist together 5 pairs of white stamens. Fasten them in the center of the flower.

Fasten them in the center of the flower


Yellow flower. Take 21 cm of yellow tape with a width of 4 cm. Lay the line as for the white flower and form the petals. For the middle, twist 3 pairs of white stamens.

Orange flower


Orange flower. You will need an orange ribbon with a width of 2.5 cm and a length of 27 cm. Lay a zigzag stitch and pull the tape tight. Fasten the thread.

Fold in half


Fold in half 3 pairs of orange stamens and sew along the tape assembly line.

tape assembly lines


At the base of the orange flower, sew 2 pointed leaves with assemblies of light green organza. For each leaflet, use 6 cm tape with a width of 2.5 cm. Then fold the tape as shown in the photo. On both sides, lay 2 folds and sew along the bottom edge.

bend corners


Make 3 leaves "Sail". For each leaflet, you need to take 13 cm of tape with a width of 2.5 cm, fold in half and bend the corners.

Tighten the tape and fasten


Starting from the corner, lay the stitches along the fold in an oblique line down, then in a straight line and again in an oblique up. Tighten the tape and fasten.

From a piece of light green ribbon


From a piece of light green ribbon and 3 pearl beads, make an open pea pod.

with orange flower


From individual elements (stem, leaves, pod), collect a composition with an orange flower.

Cut from tulle


Composition "Wedding rings". Cut a circle with a diameter of 4 cm from tulle. In the middle, lightly pick up with a thread. Use glue to fix the rings on the tulle.

rings


Lay out the elements of composition on the box cover. Make notes with a pencil and apply glue to these places. Attach all elements of the composition.

casket cover


With double-sided tape, attach a patterned white tape 4 cm wide on the sides of the casket.

Wedding box
come back
Comments (0)

Read also

Error codes for washing machines