Pin bracelet

Various accessories have always been for the girl something more than just a beautiful little thing. It is thanks to various decorations that one can judge the character of a person. The color scheme, the material of the product, its image and many other qualities of decoration can tell the interlocutor about the true values ​​of a person. In accessories, I especially appreciate not the high cost and luxury, but simplicity and originality. A pin bracelet bribed me with just those qualities. It took me about half an hour of free time to create it, and its service life is unlimited. In addition, depending on the circumstances, it can be easily combined both with a sports style and put on for going to a cafe. To make it, I needed:



Ordinary pins;
Elastic band for jewelry;
Beads;
Beads;
Pliers.
First of all, we collect beads for each pin.



I did this in random order, but it was possible to make some kind of pattern. To do this, it is enough to calculate the amount of beads placed on one pin, and to string the beads of the selected shades on paper according to a preliminary sketch.
After the opening part of the pin is filled, you need to close it and squeeze the head with pliers. So you can definitely be sure that in the process of wearing it will not open and will not hurt you.



On average, about 30-35 pins go into a slightly full hand.



When everything is prepared, you can begin to assemble the bracelet. To do this, you need two pieces of special gum. It can usually be found in any store for needlework or sewing. The length of the segment should be equal to the girth of the wrist + small tails in order to make a knot.



Now we begin to string pins on one of the rubber bands, alternating them with beads.



Thread the gum through the holes in the bottom of the pin. In addition, you need to ensure that all pins look with the bead side in the same direction.
It is necessary to string until the size of the resulting fringe in a calm position is equal to the volume of the wrist.



As soon as we realized that it’s enough, we tie it all on a double knot and cut off the excess.



when tying it is better not to stretch the elastic, otherwise the bracelet will not fit on your hand. Now repeat the stringing process for the bottom.



Our pin bracelet is ready.