DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Padding computer chair
In use furniture sooner or later becomes worthless. If the budget of your family cannot allow the replacement of old furniture, then this can be solved by self-repair. As an example, imagine a computer chair. More precisely hauling a computer chair with your own hands.
The first and most crucial step is the choice of material for the constriction of a computer chair. Today, the market offers a wide range of different materials. Starting from ordinary upholstery fabric and ending with leatherette or genuine leather. It is necessary to choose a material that will possess the necessary technological properties (extensibility, strength, etc.). And also be combined with the design of your room. Our choice was made on genuine leather.
In addition to upholstery, it is necessary to pay attention to the condition of the filler. If it is trodden or began to crumble it needs to be replaced. As a filler, foam rubber or polyurethane foam can be used.
Before you begin the process of hauling a computer chair, you need to prepare the necessary tools: Phillips and conventional screwdrivers, narrow-nose pliers, a construction stapler, staples, ruler, scissors, stationery knife, open-end wrench and ring spanner (8-10).

Now we proceed directly to the constriction itself. First, unscrew the back and remove the old upholstery.

seat assembly


To do this, you need an anti-stapler or a simple screwdriver, because the material is attached using staples. Then, according to the size of the old upholstery, we cut out a new one and attach it to the building stapler.

spin the chair

unscrew

filler

all materials for hauling

cut skin

front back


We carry out the same procedure with the seat of a computer chair. After the back and seat are tightened, we fasten them in place to the frame of the chair.

overtight chair

Padding a computer chair
come back
Comments (5)
  1. Dmitry
    #1 Dmitry Guests January 19, 2014 15:24
    0
    Useful article. At home, too, will be engaged in the constriction of his chair.
  2. N1tro
    #2 N1tro Guests August 22, 2017 09:51
    0
    Respect to the author! In simple language I described how to make a workplace more attractive!
  3. Guest Sergey
    #3 Guest Sergey Guests June 21, 2018 19:39
    1
    Full hat! Disassemble a chair, no mind or skill is needed !!!! The author did NOT disclose the essence: "... and we attach it to the building stapler in place ...." We attach to the place ....- this is the main thing !!!!!!! Pull and without any wrinkles or loosening “attach” is not easy !! And to achieve even such quality as in the last muddy photos will not work the first time !!!
    1. Staple
      #4 Staple Guests July 24, 2018 11:46
      3
      Everything will come out. If your hands are not from ...
    2. Guest Sergey
      #5 Guest Sergey Guests July 9, 2019 18:00
      0
      and yet the essence is not described correctly, although the title is written that hauling ...

Read also

Error codes for washing machines