Now origami - so called crafts from paper - a very popular activity. But some figures have very complicated and incomprehensible schemes. And children cannot repeat them. Therefore, a description with a step-by-step photo is a good help for kids and their parents.
Work sequence.
Take a piece of landscape paper in black or blue (single sided).
Bend diagonally with the color side inward to make a square. Cut the excess.
Lay the workpiece fold down.
Fold the top side of the left corner down one third of the distance. Iron the fold.
Do the same on the other side.
Bend the free blue corner on both sides up, and then, bending in half, lower it down.
Turn over the workpiece as shown in the photo. Bend the top corner down.
Bend well. It will be the head of a penguin.
Expand the workpiece in half, grab the edges of the folds so that you get a sharp hat.
Close the two sides again, iron the top of the folded sheet.
Blue sharp corner bend as shown in the photo.
Then again, but upward.
Return it to its original position. Spread the upper two edges of the workpiece and press the beak along the bend inward.
Now take the beak and tip for the base, press with your fingers on both sides and begin to slowly bring them together.
After making a small fold, give the penguin's beak the correct position.
Bend the lower right corner of the workpiece so that you get a torso.
Bend the long corner to the outside of the figure.
It should protrude slightly beyond the contour of the body. Smooth all folds and unfold again.
Take the workpiece by the lower part on both sides of the corner that you just bent, expand it on the tummy and hide the corner inside the figure, leaving only a small corner. These are the penguin's paws.
On the lower part of the body, fold the paper much inward, and give the leg a stable position.
To make your penguin just like a real one, glue its eyes.
And so that he would not be bored, make one more, but a different color.
