DIY do it yourself
Master classes, instructions, useful tips, recipes.
» »Paper towel holder
Paper towels in the kitchen are always an irreplaceable thing. I propose to make a towel holder with my own hands. Its design is very simple, and the creation will take no more than two hours. At the same time, you will get a very strong holder, you will be sure of its durability, as well as that it is environmentally friendly. And imagine how a wooden holder looks better than a plastic one.

To create a holder for paper towels, we need: the remains of a wooden board 2 cm thick, thick steel wire, 10 self-tapping screws, a grinder, a grinding nozzle for a grinder, a drill.

1. Cut a rectangle from a board with dimensions of 33 by 10 cm.

Cut out the rectangle


2. Cut 2 rectangles 10 by 12 cm. Using a grinder, cut one corner, make it rounded.

Cut 2 rectangles


3. We dress the grinding nozzle on the grinder, grind the parts to perfect smoothness.
4. We take a piece of wire 36 cm long. We wrap one edge so that we have a hook.

piece of wire


5. Now we collect all the elements of the holder. Using screws we attach the sides to the back wall.

the details


6. Drill with a drill with a thickness equal to the thickness of the wire, drill holes in the side walls.
7. In the back wall we drill three non-through holes to about the middle of the thickness of the board.
8. Pass the wire through the holes in the side walls.
9. We insert three self-tapping screws into the holes made earlier and with the help of a drill or screwdriver we twist them into the wall.
10. Here is our holder and ready. It remains only to put on a roll of paper towels. To do this, remove the wire from one side, put on a roll and thread the wire through the side wall again.

Paper towels in the kitchen


The holder for paper towels is most often mounted on the wall near the sink, but you can also find a place for it near the stove. It is very convenient to use, firstly, because the towel is always at hand, and secondly, because when you tear off one towel, you will never stain another.

Paper towel holder
come back
Comments (1)
  1. Guest Igor
    #1 Guest Igor Guests September 3, 2018 12:16
    3
    Made as a collective farm "Path to ruin." I am not a great specialist in grinders, but when I bought it for myself, I definitely remember in the instruction manual that it was FORBIDDEN to wear a circular saw blade on it. After all, if it jammed a little, you won’t hold it in your hands and you will look for the fifth corner in the room, hiding from the flying grinder. Such things are made by ELECTROLOBZIK, which is reliable and safe for health.
    Dee and ennoblement would need this design. Fill all cracks, cover with stain or just apply several layers of varnish. But for a collective farm it will do.

Read also

Error codes for washing machines