Such a boot in children is associated with a fairy tale and a miracle. Therefore, the child will gladly postpone all his children's affairs in order to make the same beautiful and slightly magical shoes with his mother.
And for this you need to prepare:
• thick cardboard;
• colored paper;
• scissors;
• glue;
• a simple pencil;
• beautiful ribbon.
Take a double sheet of red paper.
Draw on it the contour of the boot, which you may have pointed and with a rounded toe and even with a heel!
Gently cut. You will get two identical parts.
If the paper is thin, then they must be glued to cardboard.
Make sure that the workpieces are not on your side.
Cut the edge for the boot. To do this, take a white cardboard, attach to the upper edge of the part so that there is an allowance for gluing. Draw the top detail of the boot, rounding the corners.
Cut along the marked lines.
Glue them over the red blanks, making a 1 cm seam. Make sure that the parts are completely symmetrical. Let the glue dry.
Glue both boots together on the sides and bottom with a centimeter “seam”, leaving the top open.
Put the boot on a sheet of shiny paper and circle the bottom of the boot.
It will be the sole.
Cut out two details.
Glue to the shoe on both sides.
Cut a snowflake or any pattern from white paper. To do this, fold a circle of paper in four layers. Fold in half again. And cut the pattern. Expand. Glue to the boot. Lubricate the upper inner corner with glue and glue the ribbon made by the loop.
