DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » » »How to sew a belt
Once I wanted to get a bright belt on my pants. I found a suitable piece of fabric (satin) and a fastener for 4 UAH. So that the belt fits tightly in the fastener and does not fall off, a tape was bought for the straps on the backpack for 4 UAH. 1 meter.

tape was bought

Take an atlas 1.1 meters long and 8 cm wide, on top we put a tape 1 meter long and 3 cm wide. The atlas should be 5 cm longer on each side.

Atlas must be longer

Now we will stitch the edge of the atlas 5 cm


Tuck one edge of the belt 1 cm and stitch

Tuck one edge of the belt

Now we will tuck 1 cm of the atlas around the ribbon and overlay the pointed edge and sew to the end.

Similarly, tuck the edge of the satin at the other end of the belt and stitch

sharpened edge

tuck the edge of the atlas

Then take a buckle and wrap the resulting belt in the middle of the buckle. Stitch on the front side of the belt along the edge from two sides.

sew the edge

take a buckle

Voila, the belt is ready!

how to sew a belt
come back
Comments (0)

Read also

Error codes for washing machines