New Year's decanter

In order to create such an original decanter for the New Year, you need to be patient and have the necessary materials. You can use any container at your discretion. Any pretty bottle will do. In this master class, ordinary acrylic paints and waterproof varnish were used to coat glass and metal products.

1. We will need:

• Beautiful bottle.
• Acrylic paint.
• Fixing varnish.
• A piece of dish sponge.
• Glitter.
• Paper.



2. Cut out templates from a sheet of paper. Horse silhouette and numbers 2014.



3. Temporarily glue the template onto the bottle. We do this with water. Wet the paper, not too much, and blot away any excess drops. Let it dry slightly.



4. Apply paint to the sponge and begin to paint the decanter.



5. Apply the sponge along the edge of the template. Let's go a little deeper into the template, it's not scary. We try not to make sudden movements so as not to peel off the paper.



6. On the other side of the bottle we glue the numbers with water. The numbers can be placed both vertically and horizontally. It all depends on how much free space you have left. We repeat the same procedure for applying paint.Since the numbers are very small, frequent touching with a sponge causes the paper to begin to come off almost immediately. Therefore, we advise you to make minimal movements with the sponge.



7. By this time, the paint on the other side of the decanter will have dried slightly and you can carefully remove the paper horse template.



8. This is what the numbers look like after removing the paper. Set the decanter aside until the paint is completely dry.



9. Apply glue along the edge of the decanter. You can do without glue and apply the decoration to wet paint.



10. Add glitter.



11. Fix everything with varnish. We do this in a well-ventilated area. We apply the varnish from a can from a distance of 20-25 cm. You can use the decanter after the varnish has dried.



12. The wonderful New Year's decanter is ready.