DIY do it yourself
Master classes, instructions, useful tips, recipes.
» » »Contrast bracelet
It is not very difficult to make a beautiful original jewelry on your own hands. I offer a variant of my patent leather bracelet. Follow the description.

Necessary materials:
1. two small pieces of patent leather - one white, one red;
2. waxed cord of red and white colors;
3. special rivets;
4. buckle;

Necessary materials


Among the tools used, we need:
- a press for installing rivets;
- ruler;
- scissors;
- a pen;
- hole puncher.

we need tools


If you do not have a special press or hole punch, this is not a problem. To form holes, use an ordinary awl or cut carefully with nail scissors. Instead of a press, rivets can be installed with a conventional hammer.
So let's get started. The first thing you need is to cut 10 pieces of leather. We need 3 pieces of red leather in the following sizes: 45x15mm - 1 piece, 10x35mm - 2 pieces. And 7 pieces of white color of such sizes: 45x15mm - 1 piece, 10x35mm - 4 pieces, 100x7mm - 1 piece, 70x7mm - 1 piece.

leather pieces


The next step is to make 8 small holes in pieces measuring 45x15 mm. Try to make a pen on the back of the tag so that the holes are one against one.

8 small holes


We take a 150mm wired white cord and do diagonally weave through one hole.

cord weaving


Then we do the same with the red cord, only in the opposite direction so that we get crosses.

doing with a red cord


With the back moaning, the ponytails from the laces are fixed by simply tying knots. We cut off the remaining ponytails.

With a back moan


Next, add 2 white pieces with the letter “G” and make a hole with a hole punch

need to fold the pieces


And fasten with a press a rivet.
We do the same from the second side to get the letter “P”, just attach the red piece.

do the second hand


Such letters “P” need 2 pieces, only the second should be symmetrical to the first.

the second should be symmetrical


Further, the piece created with the help of lacing must also be connected with rivets with two letters “P”.

riveted


We take a piece of white leather measuring 70x7mm. At a distance of 25mm from the edge we make a small hole. We put on this hole on the buckle and fix the remaining tail with riveting. Then with another riveting we attach a belt to the base of the bracelet.
On the last piece we make 5 holes with a distance of 15mm. And just attach it to the base with riveting.

turned out a contrast bracelet

Large contrast bracelet


That's all, the bracelet is ready. It can also be done in any other color: black-red, black-white or any other material you have.

made a contrast bracelet

wrist bracelet

DIY contrast bracelet
come back
Comments (0)

Read also

Error codes for washing machines